Select Page

If you’re looking for a waterproof detector for shallow water hunting, the Garrett AT Pro and Garrett ATX are my top picks. You also need to consider the mineralization and other conditions of your chosen hunting ground, as this affects the type of metal detector you need. You also need to consider whether you want the detector to be effective on land too – or if you just want it for underwater detecting.

The “Pro” mode provides more detailed audio feedback, including estimated depth and target size, while the “Standard” simplifies audio signals which is useful for beginners. It’s waterproof gold detector great for detecting small coins or jewelry, due to the 15kHz operating frequency, while the manual ground balance and rapid recovery time make it suitable for most environments.

Lastly, we have iron junk, and as the name suggests, this one blinds out all iron metal. The second is called notch, and this one allows detectorists to highlight a specific metal that they want to find or one they don’t want. This is a feature that most metal detectors have and is ideal for use in areas that have a lot of trash.

The good news is, they come with sensitivity adjustment and at times ground balance control. They’re ability to save you time by filtering out junk makes them very popular. This makes them very good at finding jewelry, coins and other metal artifacts. Very Low Frequency metal detectors run between 3 to 30 kHz frequency.

When it comes to detection type, these types of products generally fall into one of two categories and that is either that they have a very low frequency (VLF) detection or they have a pulse induction (PI) type and both have their merits although PI models do tend to be more expensive than their rival. It comes in options of either 8 or 10 inch coil which are both highly effective and works perfectly if you wanted to beach hunt or wanted to dive down into the water. It has an all-metal auto-tune mode together with a 3-tone audio target ID. It has a side mount shaft so you’re able to use it while wading but this doesn’t have any true waterproof depth.

Before you can choose an underwater detector, you need to be clear about where you’re going to use it. Most detectorists start on the beach or lakeside and end up drawn to the wet sand, and then the water itself.

Also combining the search on land and in water is especially nice in the summer when you have the opportunity not only to do your favorite hobby but also to take a dip or swim. Under water, the control unit is removed and mounted on the arm or the belt, and on land, it is mounted on the rod.

This device is a great addition to your gear and you will love every moment you spend searching for treasures. Searching for metals underwater needs you to have more than just your professional swimming gear. The vibration in this device is faulty after a few months of use. The best part about this device is the fact that it has a long battery indicator.

Additionally, this device has a weight of 5 pounds so maneuvering with it underwater won’t be a problem. It’s not the ideal device when it comes to using it on land because of its weight. The fact that you are not able to hear underwater shouldn’t limit you from using this device. Add that to the control box and you have a device that’s effectively useful and easy to operate.